Thank you all for your heart warming comments.
I'm completely overwhelmed by your response to my blog candy. I'm now thinking that perhaps I should have only run it for a couple of weeks!
Quite a few have asked for a butterfly tutorial and as it links nicely to the
blog candy - here goes......
I used a butterfly stamp I designed myself and stamped onto lightweight card using VersaFine Onyx Black then embossed with clear embossing powder.
Here's a list of what I used to colour them:
A) Sakura Black Gel Pen
B) Black marker Pen - I used Marvy Le Plume but any will do
C) Purple marker pen (any)
D) Blender Pen
E) Twinkling H2Os - Sky Blue
F) Watercolour brush
And here's what to do:
1) Stamp the butterfly using Versafine and emboss with clear embossing powder - nine times.
It's a good thing to brush the card with an anti-static bag beforehand - this ensures the powder only sticks to your image.
2) Cut the butterflies out. If you're not happy cutting round the antennae a fine slither of black card folded in half and glued to the back of the body works just as well.
To stamp the reverse:
3) Ink the stamp again and carefully position the blank side of the butterfly onto the stamp
4) Firm it down using a second acrylic block or something smooth and flat like a glass coaster. Don't worry too much about achieving a perfectly aligned image, just do the best you can and I'll show you later how to 'cheat' it good.
On the embossed (top) side:
5) Run the purple marker pen round the outer edge of the butterfly's wings
6) Blend using the blender pen
7) Dot purple round the outer edge again
8) Use the blender pen to soften the edges of your dots. These butterflies look more three dimensional if you don't colour in one solid colour. Make your first colour fade towards the body.
9) Colour the next section of the wings using Twinkling H2Os (Sky Blue) - applying it with a brush and not completely filling the areas to the edge.
10) Blend out using the blender pen.
Turn the butterfly over to the reverse side (not embossed)
11) Here's your chance to correct any wobbly stamping (on the reverse) - in stages 1 & 2.
12) Run the black marker pen round the edges of the butterfly - to cover any blank or missed areas
13) Tint colour across the surface, similar to the colours used on the front. This doesn't need to be perfect - it's only a hint so the underside isn't glaringly bare!
Turn the butterfly over again (embossed side up) to finish the top detailing
14) Now using the Sakura black gel pen draw round the top edges of the butterfly wings, the antennae and the body markings
15) To finish colouring - run the black marker pen round the very outer edges of the butterfly - otherwise these are white and very visible in the explosion.
Dare I say it? GLITTER
Even if you're not a glitter person glitter makes the explosion more dramatic - it catches and plays with the light as the butterflies dance, highlighting and drawing attention to their every flutter.
Glitter colours used on this box are:
A) Crystal (in the blog candy)
B) Black holographic (in the blog candy)
If you have no other colours these will cover every need - Crystal allows any underlying colour to shine through and black holographic is dark and rich, it makes a bold statement 'fizzing and sparkling' like fireworks in a midnight sky.
C) Is a colour I mixed myself. I had blue (which was not very exciting) and mixed crystal into it. Crystal glitter made it more sparkly and a little bit translucent so the underlying colour still hints through.
16) Apply fine lines of 'dries clear' glue on some, but not all, of the purple wing areas and sprinkle with crystal glitter.
17) Allow to dry then brush off any surplus glitter (be tough with the brushing). Always start with your lightest glitter and work to your darkest being last.
18) Apply fine lines of glue to the blue areas (not all) and the body (dots only) and sprinkle with the blue glitter mix, or crystal again.
19) Allow to dry and brush off the loose glitter.
20) Apply fine lines of glue to the body and curves of glue to the wing edges.
21) Sprinkle with black holographic. Allow to dry then brush loose glitter off.
note: I dotted glitter on the wing edges of the blog candy butterflies. Curves are much better so I'll be putting that right! When glittering always try to compliment the lines of the image.
Shaping the butterflies:
Gently curve the wings by placing your thumb on top and index finger underneath, one wing at a time. Pinch and move your finger to the wing edges several times. This warms the card and 'bows' the wings. Take your time and don't force it, rushing this stage causes creases to form.
Place your thumbnail along either edge of the body and fold the wings upwards.
Attaching to the acetate:
I attach them to the acetate using 'What Glue' by Jomil. It's a 'dries clear' all purpose glue. Apply to both surfaces and just before it dries fully clear press both surfaces together - it grabs like a magnet. This glue dries flexible so it has a much stronger bond when the butterflies are exploding from the box.
That's it.
Hope it all makes sense!
I used some new Woodware punches I'd bought recently. The tropical leaves are 2" and 1". When I saw them it was love at first sight!
The Lillies are made using a large five petal flower punch, made in the same way as the flowers in the 'Fairies' box.
Couldn't resist adding a few small wooden ladybird embellishments. I applied 'Glossy Acccents' to give them a high shine, I think it makes them more realistic.
The small flowers are made using a small five petal punch and I cut 'Vs' from the petal tips. After cutting to the centre, between two petals, I rolled and glued them. They're made from yellow card, chalked with orange highlights.
I mostly used punches on this box - here's a list of the ones I used:
I decided to incorporate the Scottish national flower - thistle.
Outside panels.
Closer detail of the butterflies and thistle panels.
.JPG)
